About Us / NosotrosHOT DEALSDeals / OfertasRecycling / ReciclajeContact / ContactoInquires /Informacion
Injection / InyectorasBlow MouldingExtrusion / ExtrusorasAuxilaries / AuxiliaresDecoration / DecoracionPackaging / Empacadoras
 


USED - Werner Pfleiderer Twin Screw Extruder       (ETI# 1000)

Type ZSK58F 58 mm (2.2” diameter) screw
30:1 L/D, side by side, co – rotating
7 housing section, 2 vent port
Electrically heater water cooled
Max screw speed 300 rpm via a gearbox
by a 110.25 hp/73.5 kw – 380v/3/50hz motor
(1) 21 hole die head.
(1)Double water bath, stainless steel.
(1) Rieter  automatic type ASG 100 cutting unit
    11.25 hp/7.5 kw – 380v/3/50hz motor
(1)vibra sifter type SEK- 10- 4 – 1..0.4  
    0.6 hp/0.4 kw – 220/380v/3/50hz motor
(1)Werner Pfleiderer control panel system.
(note: some items in the photos will not ship)
 
             Price Ex-work Europe………….. USD $84,900








****************************************************************************************************

Used- Welex Sheet Line 
   
(1) Welex 2-1/2'' single screw extruder, model 250 24:1AC, 
approximate 24 to 1 L/D ratio, 3 zone non-vented barrel, electrically heated, air cooled.
Water cooled feed throat with magnet. Approximate 44-3/4'' centerline height.
Driven by a 40 hp, 500 volt, 1750 rpm DC motor thru a gearbox, ratio 9.3 to 1.
Includes a control panel with Barber-Coleman 580 controllers, 1 missing.

(1) Dynisco hydraulic screen changer, model EH-25,  no power pack.

(1) Welex 1-1/4’’ pedestal mounted single screw co-extruder, approximate 24 to 1 L/D ratio.
Electrically heated, air cooled 2 zone non-vented barrel. Driven by a 10 hp, 500 volt DC motor thru a reducer, no ratio. Includes a control panel. (1) 12" wide sheet die.

(1) Welex 3 roll sheet stack with (3) 8" diameter x 14" wide chrome plated cored rolls,
driven by a 1hp DC gear motor. Includes a pump, heat exchanger, and control panel.

(1)Cooling section, (1) 14’’ pull roll stand with (2) 4'' diameter x 14'' wide chrome plated rolls, pneumatically adjustable, requires motor.

(1) Dual station winder, approximate capacity roll 14’’ wide x 24’’ diameter, each station driven by a 1/3hp motor, and (1) Quickdraft 2hp blower.

                 Price Ex-Works USA…………………….US$69,500





*************************************************************************************************

USED Berstorff 25 mm Twin Screw Extruder Model ZE25

Co-rotating side by side screw design
Approximately 28 to 1 L/D ratio
5 barrel sections, electrically heated, air cooled, 1 feed section
46" centerline height
Driven by a 7 1/2 hp, 240 volts, 1750/2300 rpm DC motor thru a gearbox.
Includes a control panel with Eurotherm 808 controllers and a reliance VS drive.
Both mounted on casters.
Built 1990 / (Feb. 1991)

                    Price Ex-Works USA ................... US$64,500


**************************************************************************************************
USED Leistritz Twin Screw Co-Rotating Multi-Mode Extruder

Model Micro 18G/40D.
18 mm screw diameter, 40:1 L/d ratio, electrically heated, water cooled.
10 total barrel sections with 1 feed, 6 closed, 2 vented and plugged, 1 vented.
Approx 3 hp DC motor with controller.
On base with 8 zone control panel.
Also includes water bath and strand pelletizer.

More pictures available.

                  Price Ex -Works USA ...................... US$94,750


*************************************************************************************************
New Extrusion Vacuum Tanks   (ETI #SAI)

  • Excellent Heavy Duty
  • Fast Deliveries at very Economical Prices


Vacuum Tanks on above picture for pipe upto 630 mm (24 in)

*****************************************************************************************************


FOR SALE!

1988 Kampf 2-drum contact winding slitte          (ETI #14000)

- Type:  Drum Type – Contact winding
- Width: 1600mm (63” nominal)
- Model:  Universal 5F / GL
- Materials:  Soft & rigid films, papers
- Year of Mfg:  Late 80’s
- Speed:  600 Meters/min  (1950 FPM)
- Type of Slitting:  Shear and Razor (in air)
- Mandrels: 3” and 6”
- Tension: by pneumatic brake
- Unwind diameter: 1 meter (40”)
- Rewind Diameter: 600mm  (24”)
- Voltage: 460 V – 3-phase – 60 cycles


*****************************************************************************************************

1996 Sano 14" 5 layer blown film die , fixed block and cart.14" 5 layer Sano stationery die package with cart

- Model 5 layer stack 14"
- SN 3094-21
- 460VUsed only in a lab and has very low hours 

                                         PRICE: $39,90 USD, crated and loaded for transport.


*****************************************************************************************************

Gala model SLC6 Pelletizer             (ETI #1000)

- 460Volts.
- 5.5 hp motor on cutting head. 
- 8.2BF spin dryer.
- 80 gpm water system with internal coil heating. 
- Includes heat exchanger and pump.

                                           Precio Ex-Bodega………….US$44,900 or best offer.



Gracias por la oportunidad de poderle asesorar en sus proyectos!

 
Top