About Us / NosotrosHOT DEALSDeals / OfertasRecycling / ReciclajeContact / ContactoInquires /Informacion
Injection / InyectorasBlow MouldingExtrusion / ExtrusorasAuxilaries / AuxiliaresDecoration / DecoracionPackaging / Empacadoras
 



(2) 1997 Nissei Model PF6-2B PET Stretch Blow Molding Machine  

- Theoretical injection capacity- 515 cubic c.m.
- Screw diameter- 63 m.m.
- Cavity number (preform)- 6
- Cavity number (bottle)- 2
- Maximum product capacity- 3 liters
- Maximum neck finish diameter- 45 m.m.
- Maximum inlet outer diameter- 42 m.m.
- Maximum support ring diameter- 48 m.m.
- Maximum product outer diameter- 120 m.m.
- Maximum product height- 350 m.m.
- Maximum product weight- 73 grams
- Production capacity- approximately 1200 to 1400 bottles per hour (dependent on bottle design)
- Condition- Fair to good- low operating hours 

                      Price Ex-Works ............... US $75,000 for both machines  







*************************************************************************************************************

1982 Bekum Model H-151 Dual Sided Continuous Extrusion Blow Molding Machine                                                                                            (ETI# 5000)
- Currently set up to run HDPE bottles
- Head configuration- single parison head
- Press arrangement- dual sided machine
- Extruder diameter- 90 mm
- Power specifications- 575/220 volts- 60 hz
- Controls- Bekum 29 point parison programmer with
upgraded Falcone operator control station
-The machine has been well maintained and is in
good condition and immediately available. - Condition- Good

                Price Ex- Works USA.......................US$85,500






***************************************************************************************************
200 LITER  DRUM - IND. BLOWMOLDER MACHINE

COMPLETE WITH  55 GAL CLOSE TIE DRUMPART TAKE 0OUTBOTTOM BLOW WITH SPREADERLEAK TESTER. 

               Price Ex-Works  .....................US$89,000


*********************************************************************************************************

Used- 1998 Uniloy Model 350R3 6 Head Blow Molder, New 1988.

6 heads are set on 8" centers, has Maaco 8000 programmable control and includes 6 tie bar platen with (2) sections each with 28.5" wide X 16" top to bottom clear platen.
(3) Heads per section. Extruder is 3.5", with 100 hp AC motor and Siemens model 6SE7231-2EB20-3AB0-Z adjustable frequency controller. 460 volt AC input. 
Blow molder has side shift capabilities, includes material hopper with receiver, Trayben lubrication, 120" 6 lane cooling conveyor with (2) fans for additional cooling, and model 10041 trimmer with "Ideas In Motion" leak detector.
No tooling included in trim station.
Has blower for conveying trim scrap for grinder.
Grinder is Nelmore model RF1215M1 with an approximate 20 hp motor, sound enclosed, and blower discharge.
Previously used on bottles for detergent product. 

          Price Ex-Works USA...........................US$112,500
















************************************************************************************************************
Used-1998 Uniloy Model 350R2 6-head Blow Molder, New December 1998.


Has Maaco 8000 programmer, pedestal operator control and 3.5" extruder with 125 hp AC motor and Eaton adjustable frequency drive controller, model AF5000+. 460 volt AC input.

Has side shift capabilitites, 6 head design on 10.5" centers in (2) sets of (3). Clamp has overall size of 16" X 82", 6 tie bar design with (2) sections each 16" X 36" clear platen.

Includes hopper with receiver, electro-static air cleaner, and Polycool for input air.
Downstream includes model 10041DL trimmer.
Includes tooling and bottle conveyor saddles.
460 volt AC input. No cooling conveyor included.
Bottles fed directly from clamp to trim conveyor.
Ttrim conveyor equipped with blower feeding 30 hp polymer grinder, model 1620SPL, with blower discharge.
Grinder equipped with input conveyor from trim feeder approximately 15' long, 12" X 12" cross section.
Previously used on detergent bottles. 

                   Price Ex-Works USA.........................US$210,000 












***********************************************************************************************************
Used- Uniloy Model
400R20 Reciprocating Blow Molder.

No side shift. Has 4 head design on 14" centers.
Overall clamp is 21.5" top to bottom X 68" wide. 6 tie bar clamp with (2) compartments each 28.5" X 21.5" clear platen.
Includes 4" extruder driven by 125 hp AC motor with Siemens model 6SE7231-8EB20-3AB0-Z adjustable frequency controller. 460 volt AC input.
Includes Siemens control for machine functions and head programmer.
Downstream includes 4 lane cooling conveyor 100" long with Uniloy model 10041 trimmer including tooling and bottle saddles, 460 volt AC input.
Has blower discharge and approximately 20' long trim conveyor feeding LR System grinder, model SG400B75 granulator with blower discharge.
Has 14" X 18" feed throat. 

               Price Ex-Works USA...........................US$225,000















**************************************************************************************************

1995 Nissei Model 650NHII PET Stretch Blow Molding Machines  (ETI# 5000)


- Relativamente muy bajas horas de uso.
- Disponible inmediatamente
- Oferta incluye los siguientes equipos:  

 Secador de resina modelo AEC Whitlock Model WD-225 
   - Tolva de secado

   - Banda de evacuacion de partes
-  Equipo en muy buenas condiciones y con excelente mantenimeinto. 

  Precio  Ex-Works USA.....U.S. $118,500


***************************************************************************************************************

 USED 1982 Hayssen Econoblow blow molding machine   (ETI #1000)

Model 5030-AS-375
Approximate 280 gram shot
2" extruder, 24:1 L/D, 30 hp motor
22-1/4" x 22-1/4" platens
Effective platen size 16" x 21"
20 ton clamp
20" daylight
10" stroke
Includes a Bottlet stripper and Moog controls
2571 hours on meter

Price Ex-Works USA.............................................................US$ 67,500





















**************************************************************************************************************

1995 Sidel Model SBO4/6 PET Stretch Blow Molding Machine


- Number of cavities- 4        
- Production capacity- 4800 bottles per hour
- Type mold hangers- GUPM 
- Oven type- linear
- Number of heating modules- 6
- The price includes the following auxiliary equipment:
- 1995 Thome-Crepelle (Atlas Copco) Model 37P20 High Pressure (40 bar) 
   Air Compressor including air dryer
- Sogequip 10 Ton Chiller
- 1997 IEF Model PPEGL Palletizer 
- Signode Spiral Grip Model 2100 Stretch Wrapper
- Vulcatherm Model 828776-04 Thermolator
- Polyclad Labeller
- Denison Thermage Labeller
- Approximately 150 feet of table top conveyor
- Condition- Very good (the line is complete except for 
   the perform dumper and hopper)

             Price for complete package Ex-Works............... US$269,000

****************************************************************************************************

                        EQUIPOS DE SOPLADO DISPONIBLES  (ETI #5000)

Tabla de Contenido: (updated 2/11/09)

Section 1- Accumulator Head Blow Molding Machines (arranged larger to smaller head)
Section 2- Continuous Extrusion- Shuttle Type Blow Molding Machines
Section 3- Continuous Extrusion- Rotary (Wheel) Type Blow Molding Machines
Section 4- Reciprocating Screw Blow Molding Machines
Section 5- PET One-Step Stretch Blow Molding Machines
Section 6- PET Two-Step Stretch Blow Molding Machines
Section 7- Injection Blow Molding Machines

Section 1: Accumulator Head Blow Molding Machines  

- 1994 Battenfeld Fischer (Hartig) Single 100 Pound Accumulator Head Blow Molding Machine 

- 1984 Hartig Model R-5011 Single 67 Pound Accumulator Head Blow Molding Machine (Kautex head) 

- 1993 Uniloy Model Grand 55S60-5069 Single 55 Pound Accumulator Head Blow Molding Machine 

- 1992 Kautex Model KB 250 Single 57 Pound Accumulator Head Blow Molding Machine

- 1985 Hartig Model R-5189 Single 50 Pound Accumulator Head Blow Molding Machine (Kautex head) 

- 1990 Sterling Model SE-50 Single 35 Pound Accumulator Head Blow Molding Machine

- 1994 Cincinnati Milacron Model T-1100 Single 35 Pound Accumulator Head Blow Molding Machine  

- 1992 Cincinnati Milacron Model T-1100 Single 35 Pound Accumulator Head Blow Molding Machine 

- 1992 Moretti Model M-400 Single 35 Pound Accumulator Head Blow Molding Machine

- 1998 Sterling Model SE630D Dual 30 Pound Accumulator Head Blow Molding Machine

- 1994 Cincinnati Milacron Model T-2000 Dual 25 Pound Accumulator Head Blow Molding Machine

- 1994 Cincinnati Milacron Model T-1100 Single 25 Pound Accumulator Head Blow Molding Machine 

- 1993 Cincinnati Milacron Model T-1100 Single 25 Pound Accumulator Head Blow Molding Machine 

- 1994 Sterling Dual 20 Pound Accumulator Head Blow Molding Machine 

- 1991 Hartig Model MCP200 Dual 20 Pound Accumulator Head Blow Molding Machine

- 1992 Sterling Dual 15 Pound Accumulator Head Blow Molding Machine

- 2000 Cincinnati Milacron Model T-1100W Dual 15 Pound Accumulator Head Blow Molding Machine 

- 2003 Cincinnati Milacron Model T-800 Dual 15 Pound Accumulator Head Blow Molding Machine 

- 1993 Cincinnati Milacron Model E90 Single 15 Pound Accumulator Head Blow Molding Machine 

-  1993 Improved Model BAX50-212 Dual 12 Pound Accumulator Head Blow Molding Machine

- 1995 Cincinnati Milacron Model T-800 Dual 10 Pound Accumulator Head Blow Molding Machine 

- 1987 Hartig Model SMP3510-3240 S65 Single 10 Pound Accumulator Head Blow Molding Machine 

- 1996 Uniloy Model UMA-35-70-3-DS Dual 6.6 Pound Accumulator Head Blow Molding Machine 

- 1993 Krupp Kautex Model KEB 10 Single 6 Pound Accumulator Head Blow Molding Machine (with material dryer/hopper, grinder, annealing oven, and 5 gallon polycarbonate bottle mold- complete line) 

- 2000 Cincinnati Milacron Model E-90 Dual 5 Pound Accumulator Head Blow Molding Machine 

- 1985 Sterling Model SE34 Dual 3 Pound Accumulator Head Blow Molding Machine

-1994 Cincinnati Milacron Model E75 Dual 2 1/2 Pound Accumulator Head Blow Molding Machine 

- 1988 Hayssen Model 5030 AS1000 Single 2 ½ Pound Accumulator Head Blow Molding Machine 

- 1984 Hayssen Model CD1000 Dual 2 ½ Pound Accumulator Head Blow Molding Machine
 

Section 2: Continuous Extrusion- Shuttle Type Blow Molding Machines

- 2005 Kautex Model KBS2-120 Co-Extrusion (6 extruders) Continuous Extrusion Blow Molding Machine (to make multi-walled fuel tanks) 

- 2007 JSW Model NB150-1CCE Co-Extrusion (6 extruders) Continuous Extrusion Blow Molding Machine (to make multi-walled fuel tanks for cars and trucks)  

- 1995 Bekum Model BA 330M Co-Extrusion (5 extruders) Continuous Extrusion Blow Molding Machine (to make multi-walled fuel tanks for cars and trucks) 

- 1994 Bekum BA 330MD Co-Extrusion (5 extruders) Continuous Extrusion Blow Molding Machine (to make multi-walled fuel tanks for cars and trucks) 

- 1990 Bekum Model BM 602D Dual Sided Co-Extrusion (3 extruders) Continuous Extrusion Blow Molding Machine 

- 1986 Bekum Model H-202 Dual Sided Continuous Extrusion Blow Molding Machine

- 1974 Bekum Model H-201 Dual Sided Continuous Extrusion Blow Molding Machine

- 1972 Bekum Model H-201 Dual Sided Continuous Extrusion Blow Molding Machine

- 1993 Bekum Model H-155 Dual Sided Continuous Extrusion Blow Molding Machine

- 1986 Bekum Model H-151 Dual Sided Continuous Extrusion Blow Molding Machine

- 1990 Bekum Model H-121D Dual Sided Continuous Extrusion Blow Molding Machine

- 1983 Bekum Model H-121 Dual Sided Co-Extrusion (3 extruders) Continuous Extrusion Blow Molding Machine (R and D laboratory machine) 

- 1977 Bekum Model H-111 Dual Sided Continuous Extrusion Blow Molding Machine

- 1984 Bekum Model BM 401S Single Sided Co-Extrusion (5 extruders) Continuous Extrusion Blow Molding Machine 

- 1981 Bekum Model BAE5 Dual Sided Continuous Extrusion Blow Molding Machine
- 1994 Battenfeld Fischer Model FHB 106-2 Dual Sided Continuous Extrusion Blow Molding Machine

- 1984 Battenfeld Fischer Model FHB 106-1 Dual Sided Continuous Extrusion Blow Molding Machine 

- 1983 Battenfeld Fischer Model FHB 106-1 Dual Sided Continuous Extrusion Blow Molding Machine

- 1984 Battenfeld Fischer Model FHB 054-1 Dual Sided Continuous Extrusion Blow Molding Machine 

- 1985 Battenfeld Fischer Model VK1-6DL Dual Sided Continuous Extrusion Blow Molding Machine 

- 1987 Battenfeld Fischer Model VK1-4 Single Sided Continuous Extrusion Blow Molding Machine 

- 1991 Battenfeld Fischer Model VK1-1.02 Single Sided Continuous Extrusion Blow Molding Machine

- 2004 Akei Model AKLIH4/8 Dual Sided Continuous Extrusion Blow Molding Machine

- 2005 B&W Model BW 6000 DE Dual Sided Continuous Extrusion Blow Molding Machine

- 1996 Uniloy Comec Model MSCK/D Co-Extrusion (3 extruders) Continuous Extrusion Blow Molding Machine 

- 1986 Uniloy Comec Model MSC/D Co-Extrusion Continuous Extrusion Blow Molding Machine (includes leak detector, grinder, vision system, conveyor- complete line)

- 1992 Uniloy Comec Model MSB/D Dual Sided Continuous Extrusion Blow Molding Machine

- 1986 Uniloy Comec Model MSB/D Dual Sided Continuous Extrusion Blow Molding Machine

- 1986 Uniloy Comec Model MSB/S Single Sided Continuous Extrusion Blow Molding Machine

- 1993 Magic Model MGL5D Dual Sided Continuous Extrusion Blow Molding Machine

- 1992 Techne Model 20000 Continuous Extrusion Blow Molding Machine (can produce 5 gallon containers) 

- 1993 Techne Model 5000S Dual Sided Continuous Extrusion Blow Molding Machine (in mold labeling capability) 

- Hayssen Model 2125 Monoblow Continuous Extrusion Blow Molding Machines

- Dae Hung (Korean) Dual Sided Continuous Extrusion Blow Molding Machine

 
Section 3: Continuous Extrusion- Rotary (Wheel) Type Blow Molding Machines

- 1994 Uniloy Model 12 STA 12 Station Co-Extrusion (5 extruders, 7 layer head) Continuous Extrusion Vertical Wheel Blow Molding Machine (complete line to produce ready to fill 4 and 5 quart bottles) 

- 1992 Tokyo Glass Seiki (Placo Extruder) Model JSA-20 20 Station Continuous Extrusion Wheel Blow Molding Machine with de tabber and trimmer (very low operating hours)

 - 1980 Comatic Continuous Extrusion Wheel Blow Molding Machine with AIS Leak Detector and Garold Trimmer


Section 4: Reciprocating Screw Blow Molding Machines

- 1983 Uniloy Model 400R25 (4) Head Reciprocating Screw Blow Molding Machine (can produce 2 ½ gallon and larger containers) 

- 1997 Uniloy Model 400R20 (4) Head Reciprocating Screw Blow Molding Machine (can produce 2 ½ gallon containers) 

- 1985 Uniloy Model 350R4 (5) Head Reciprocating Screw Blow Molding Machine (can produce “F” style bottles) 

- Uniloy Model 350 R4 (4) Head Reciprocating Screw Blow Molding Machine (can produce 2 ½ gallon “F” style bottles) 

- 1994 Uniloy Model 350R3 (4) Head Reciprocating Screw Blow Molding Machine

 - 1987 Uniloy Model 350 R3 (10) Head Reciprocating Screw Blow Molding Machine (1/2 gallon machine)

- 1998 Uniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine

 - Uniloy Model 350 R2 (12) Head Reciprocating Screw Blow Molding Machine (quart machine)

- Uniloy Model 350R2 (5) Head Reciprocating Screw Blow Molding Machine (includes molds to produce (1) and ½ gallon industrial round bottles) 

- 1985 Uniloy Model 350R2 (4) Head Reciprocating Screw Blow Molding Machine (gallon machine) 

 - Uniloy Model 350R1 (4) Head Reciprocating Screw Blow Molding Machine (gallon machine)

- 1970 Uniloy Model 5835 (4) Head Reciprocating Screw Blow Molding Machine (gallon machine) 

- Uniloy Model 5500 (4) Head Reciprocating Screw Blow Molding Machine (gallon machine with 1 gallon and ½ gallon dairy molds) 

- 1996 Uniloy Model 250 R1 (8) Head Reciprocating Screw Blow Molding Machine  

- 1994 Uniloy Model 250 R1 (6) Head Reciprocating Screw Blow Molding Machine (1/2 gallon machine) 

- Uniloy Model 2016 (2) Head Reciprocating Screw Blow Molding Machine (gallon machine)

- 1992 Liberty Model IS 4500 (2) Head Reciprocating Screw Blow Molding Machine (dual clamp machine- 15” center distances between heads, can do 2 ½ gallon bottles) 

- 1995 Liberty Model RS 3500 (10) Head Reciprocating Screw Blow Molding Machine

- 1989 Liberty Model 3500 (10) Head Reciprocating Screw Blow Molding Machines

- 1995 Impco Model B37 R180SDH Dual Head Reciprocating Screw Blow Molding Machine

 - 1998 Impco Model B30 R180SDH Single 5 Pound Head Reciprocating Screw Blow Molding Machine 

- 1985 Impco Model B30-SDH  Dual Head Reciprocating Screw Blow Molding Machine

- 1983 Impco Model B13SDH- R25 Single One Pound Single Head Reciprocating Screw Blow Molding Machine 

- 1985 Rocheleau Model SPB-2-2 Dual Head Reciprocating Screw Blow Molding Machine

- 1980 Hayssen Model Econoblow Series 75 Single Head Reciprocating Screw Blow Molding Machine  

- 1978 Hayssen Model 445 Single One Pound Head Reciprocating Screw Blow Molding Machine  

- Baker Model CST 75 6 Head Twin Extruder Reciprocating Screw Blow Molding Machine
 

Section 5: PET One-Step Stretch Blow Molding Machines

- 1998 Nissei Model PF6-2B PET Stretch Blow Molding Machine 

- 1997 Nissei Model PF6-2B PET Stretch Blow Molding Machine  

- 1998 Nissei Model 300DP PET Stretch Blow Molding Machine 

- 1995 Nissei Model 650NHII  PET Stretch Blow Molding Machine

- (2) 1990 Nissei Model 16/300B PET Stretch Blow Molding Machines

 - Nissei Model ASB-250EXHII PET Stretch Blow Molding Machine

- Nissei Model ASB-250EX TH PET Stretch Blow Molding Machine (completely rebuilt)

 - 1997 Nissei Model ASB 50 PET Stretch Blow Molding Machine

 - 1991 Aoki Model SBIII-1000L-150 PET Stretch Blow Molding Machine including material dryer, chiller, and thermalators (can make wide mouth containers)  

  - 1992 Aoki Model SBIII 1000NL-100 PET Stretch Blow Molding Machine

 - 1997 Aoki Model SBIII 500L-75 PET Stretch Blow Molding Machine

 - 1986 Aoki Model SBIII 500 PET Stretch Blow Molding Machine (upgraded controls)

 - 1995 SIPA Model ECS 8000 “32/16” PET Stretch Blow Molding Machine with molds

 
Section 6: Pet Two-Step Stretch Blow Molding Machines

- 1993 Sidel Model SBO 24/24 PET Stretch Blow Molding Machine

- (2) 1990 Sidel Model SBO 24/20 PET Stretch Blow Molding Machine with 12 molds and spare parts (rebuilt in 2004)

 - 1993 Sidel Model SBO 16 PET Stretch Blow Molding Machine

 - 1993 Sidel Model SBO 6 PET Stretch Blow Molding Machine

 - 1995 Sidel Model SBO 4/6 PET Stretch Blow Molding Machine 

 - 2000 EFI Autotec Model RSB-2 PET Stretch Blow Molding Machine 

 - 1996 Mag-Plastic Model SSB-20 PET Stretch Blow Molding Machine

 
Section 7: Injection Blow Molding Machines 

 - 1987 Jomar Model 115 Injection Blow Molding Machine

 - 1988 Jomar Model 85 Injection Blow Molding Machine

 - 1976 Jomar Model 65 Injection Blow Molding Machine

 - 1981 Jomar Model 40 Injection Blow Molding Machine

-  1985 Uniloy/Rainville Model 88 Injection Blow Molding Machine 

- 1980 Uniloy/Rainville Model 70-3 Injection Blow Molding Machine

 - 2000 Uniloy Model 45-3S Injection Blow Molding Machine

 - 1981 General Machinery (Wheaton) Model PSC-161 Injection Blow Molding Machine


Gracias por la oportunidad de poderle asesorar en sus proyectos!

 
Top